Our Road Trip Mix
More Junk Ladies: Projects
Click to see The Junk Ladies Gorilla Glue interview on The Today Show
Project #5 Scrabble Surprise
Tools List: Saw (we used a radial arm saw) Nail Gun/Nails Screwdriver/Screws
Method Step 1. Measure the Scrabble board. Cut plywood one half inch less than the boards' length/width.
Step 2. Whip out the barn board. Saw a miter joint (45 degree angle) for each corner of the Scrabble board. Make sure the length of barn board equals the length of the Scrabble board. Step 3. Place the plywood behind the game board. Put one section of the barn board frame onto its appropriate spot on the Scrabble board. Step 4. Very carefully now... shoot a nail through an inconspicuous spot on the barn board THROUGH the Scrabble board and plywood. This will need to be done at an angle Step 5. Repeat step 4 for each section of the barn board frame.
Step 6. Screw the hangers into the back of the plywood.
Step 7. Carefully plan your Scrabble concoction. This is the hardest part.
Step 8. Glue the letters on.
Tips: There are many ways to frame a game board, but we used the tools and methods with which we are the most comfortable. Don't hesitate to change the formula.
Other Projects: Project #1 - Wire Bookframe Project #2 - Domino Post-it Holder Project #3 - Bendy Ruler Frame