To clean oil, grease, or dirt stains from concrete, apply Gorilla Concrete Cleaner & Degreaser directly on the stain. Allow to sit for 8-10 minutes, scrub thoroughly with a stiff brush, and proceed to rinse with water. Repeat as needed for tougher stains.
Oil and grease cling to concrete, leaving patios and driveways looking worn and dated. Gorilla Concrete Cleaner & Degreaser cuts through the buildup and brings your surfaces back to life.
.webp)
.webp)
Supplies Needed
- Gorilla Concrete Cleaner & Degreaser
- One bottle cleans up to 550 sq ft or an entire 2.5-car garage
- Stiff brush
- Water
.png)
Cleaner & Degreaser
What surfaces does this work on?
- Garage floors
- Patios
- Driveways
- Sidewalks
- Pavers
- & more!
.webp)
What materials does this work on?
- Bare & coated concrete
- Masonry
- Stone
- Brick
Common causes of stains
- Vehicle oil leakage
- Tire marks
- Cooking grease spills
- Buildup of grease and dirt over years
How to clean concrete stains
1. Remove loose dirt from concrete
Sweep away anything that is loose, such as dust or dirt, before you apply your cleaner.
.webp)
2. Apply your concrete cleaner
For heavier stains, apply Gorilla Concrete Cleaner & Degreaser at full strenth. For lighter stains or general cleaning, dilute with water 1:1, or as needed (dilution guide).
.webp)
3. Let it sit up to 10 minutes
Allow your cleaner to permeate and break down the oil and grease.
4. Scrub thoroughly
Use a stiff, thick-bristled brush to scrub the concrete to help loosen buildup of grease and oil.
.webp)
5. Rinse
Use water to rinse clean, and see if another coat is needed after. If staining remains, repeat the application until the desired level of cleaning is achieved.
When should you dilute the cleaner?
More jobs, more coverage with one concentrate that adapts to any task.
Use full strength for:
- Deep oil stains
- Constant-use garage floors
- Oil residue from machinery or vehicles
Use dilution for:
- General cleaning
- Dirt buildup
- Larger areas
Ready to clean your concrete?
Cleaner & Degreaser
Frequently asked questions
Does grease stain concrete permanently?
If remained untreated for long periods of time, yes oil can penetrate much deeper into concrete. However, degreasers such as Gorilla Concrete Cleaner & Degreaser can help to lift up this grime buildup.
Can it be used on outdoor concrete?
Yes, Gorilla Concrete Cleaner & Degreaser can be used outside on many areas, such as driveways and patios.
Is it safe for plants/grass?
Generally yes, but rinse thoroughly with water after contact to avoid any possible damage.
What surfaces can I use Gorilla Concrete Cleaner & Degreaser on?
Gorilla Concrete Cleaner & Degreaser works on bare concrete, coated concrete, masonry, brick, stone, and more. It's great for garage floors, driveways, sidewalks, patios, and pavers.
Can I use Gorilla Concrete Cleaner & Degreaser indoors and outdoors?
Yes. The formula is designed for both interior and exterior use, so you can tackle stains in your garage just as easily as on your driveway or patio.
How much area does one bottle cover?
One 64 fl. oz. bottle covers up to 275 sq. ft. when used full strength, or up to 550 sq. ft. when diluted 1:1 with water.
Do I need to dilute Gorilla Concrete Cleaner & Degreaser before use?
It depends on the job. For heavy or stubborn stains (oil, grease build-up), apply full strength. For routine or general cleaning, dilute 1:1 with water. The full-strength application covers up to 275 sq. ft., while the diluted mix covers up to 550 sq. ft.