100% Silicone Kitchen & Bath
Clear
Gorilla 100% Silicone Kitchen & Bath forms a durable, 100% waterproof seal that holds up in wet, humid spaces. With lifetime mold resistance* and a flexible, long-lasting bond, it won’t shrink, crack, or break down over time.
*Cured sealant is resistant to mold. Cured sealant must be cleaned regularly with soap and water to prevent growth on top of the sealant.
TO OPEN: Cut nozzle at 45° angle to desired bead size. Completely puncture inner foil seal.
TO USE: All surfaces should be clean and free of dirt, grease, oil, and old sealant. For gaps larger than 1/2", use a backer rod. Best if applied above 40°F (5°C).
1. Insert into cartridge gun.
2. Apply sealant, pushing bead ahead of nozzle.
3. Smooth bead immediately after application, before a skin forms.
30 MINUTE WATER-READY: Can be exposed to water in as little as 30 minutes based on 3/16" bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hours.
CLEAN-UP: Wipe off wet sealant immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.
STORAGE: Store in cool, dry location with nozzle attached. To re-use product, remove nozzle and clean out cured sealant from the tip.
.jpg)
COVERAGE: 52 lin. Ft. using 3/16" bead
SERVICE TEMP: -40°F to 350°F (-40°C to 176°C)
CURE TIME: 24 hours. Cure time will increase with lower temperature, humidity and larger bead size.
SPECIFICATION: Meets ASTM C-920 specification for Class 35 use G.
NOTE: Always test product compatibility before use. Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass and galvanized metals.
- 30 MINUTE WATER-READY
- LIFETIME MOLD RESISTANCE*
- HIGH FLEXIBILITY
- NOT PAINTABLE
- 100% WATERPROOF
- SHRINK & CRACK PROOF
- INDOOR/OUTDOOR
- LIFETIME GUARANTEE
Frequently Asked Questions
Lorem ipsum dolor amoset
We realize any DIY project may have a spill and we want to help you with tips and tricks to successfully remove glue from fingers and nails.
For bonded skin, please call 1-800-420-7186 to speak to a medical professional.
- Is the nozzle reusable?
- Yes. For the tube, we recommend removing the nozzle after each use and replacing the cap to store tube (nozzle can hang from side of tube).For the nozzle, let sealant cure completely and then remove cured sealant manually.
- For the cartridge, let sealant cure in nozzle completely and then remove cured sealant manually.
- Can Gorilla Sealant be used as an adhesive?
- Yes, Gorilla Sealant can be used as an adhesive for light duty applications. For heavy duty applications, we would recommend Gorilla Construction Adhesive.
- Will Gorilla Sealant bond plastic/vinyl/rubber?
- Gorilla Sealant may be used on PVC pipes, but not in high-pressure applications. Gorilla Sealant may not work well on certain difficult to bond plastics, such as polyethylene (PE) and polypropylene (PP), or certain types of rubber with high oil or plasticizer content.
- Is Gorilla Sealant food safe?
- Gorilla Sealant is compliant for incidental food contact per FDA 21CFR177.2600.
- How do I remove Gorilla Sealant from my surface?
- To clean surface while Sealant is still wet/uncured, wipe off wet sealant immediately with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. For cured/dried sealant use mechanical means such as scraping or sanding.
- What should I do if I think a human or animal ingested Gorilla Sealant?
- For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team. Additional product safety and first aid information
- How do I remove Gorilla Sealant from body/skin?
- We strongly recommend wearing gloves while working on any project using Gorilla Silicone Sealants. If you do get sealant on your fingers or nails please follow these steps:
1) Wipe off as much sealant as possible with a dry cloth.
2) When most of the sealant is removed from fingers, wash hands with soap and warm water.
3) If sealant is cured, carefully rub or roll adhesive off of fingers.
- We strongly recommend wearing gloves while working on any project using Gorilla Silicone Sealants. If you do get sealant on your fingers or nails please follow these steps:
Ratings & Reviews
Recommended Products
.png){kind=spacer}
100% Silicone Window & Door Clear
100% Silicone Window & Door White
100% Silicone Kitchen & Bath White
.avif)