- 3 oz.
- 8040001
- Minis
- 8080001
Gorilla
Clear Grip®
Gorilla Clear Grip® is a flexible, fast-setting, crystal clear contact adhesive that creates a strong, permanent bond. Gorilla Clear Grip® is paintable and waterproof making it great for projects both inside and out! Build, Repair, Craft™
All surfaces should be clean and free of dirt, grease and oil. Best if used between 50°F and 90°F. Clear Grip® should only be used in a well ventilated area.
- Apply adhesive to each surface to be bonded.
- To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces.
- Press surfaces firmly together.
- NOTE: Bond forms immediately and can be difficult to reposition.
Cure Time
Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.
Storage Tips
After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.
Clean-up
Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.
Paintable
When fully cured.
*NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
APPLICATION TEMPERATURE – 50° to 90° F, best at room temperature
OUTDOOR – Yes
MOISTURE RESISTANT – Waterproof
PAINTABLE – Yes – Can be painted with water and oil based paints, spray paint
SANDABLE – Yes
STAINABLE – Yes
CURED COLOR – Clear
STORAGE TIPS – Flammable adhesive, do not use or store near heat, sparks, flames, or while smoking. Store in a cool, dry location. Wipe nozzle clean before replacing cap, for easy re-open apply a thin coat of petroleum jelly to threads.
GAP FILLING – No
PHOTO SAFE – Yes
WASHER & DRYER SAFE – Yes
- WATERPROOF – For indoor/outdoor use
- FAST GRAB – Holds in just seconds
- PERMANENT BOND
- FLEXIBLE
- CRYSTAL CLEAR
- HEAVY DUTY
- NO-RUN FORMULA
- PAINTABLE
- PHOTO SAFE
- WASHER & DRYER SAFE
- BONDS: Metal, Glass, Fabric, Wood, Ceramic, Leather, Paper, Plastic*, and More!
*Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
Frequently Asked Questions
Lorem ipsum dolor amoset
We realize any DIY project may have a spill and we want to help you with tips and tricks to successfully remove glue from fingers and nails.
For bonded skin, please call 1-800-420-7186 to speak to a medical professional.
We strongly recommend wearing gloves while working on any project using Gorilla Clear Grip. If you do get Clear Grip on your fingers or nails please follow these steps:
- Rinse skin with water.
- If glue is cured, carefully peel or roll adhesive off of fingers. Then wash your hands with soap and warm water.
- How should Gorilla Clear Grip® be stored?
- After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: for easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap.
- What surfaces does Clear Grip® adhere to?
- Gorilla Clear Grip® can be adhered to many surfaces including:
Wood, Metal, Stone, Ceramic, Glass, Plastic*, PVC, Brick, Concrete, Foam, Paper, Rubber, Fabric, and Laminate.
*NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
- Gorilla Clear Grip® can be adhered to many surfaces including:
- Is Gorilla Clear Grip® food safe?
- Clear Grip® should not be used around food.
- How do you clean up Gorilla Clear Grip®?
- When using Clear Grip®, it is best to wear safety glasses and chemical resistant gloves.
To clean uncured adhesive: wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.
See first aid treatment for skin contact.
- When using Clear Grip®, it is best to wear safety glasses and chemical resistant gloves.
- Is Gorilla Clear Grip® gap filling?
- No
- Is Gorilla Clear Grip® UV Resistant?
- Yes
- Can Gorilla Clear Grip® be used both indoors and outdoors?
- Yes, Gorilla Clear Grip® can be used both indoors and outdoors.
- Is Gorilla Clear Grip® stainable?
- Yes, Gorilla Clear Grip® is stainable when fully cured.
- Is Gorilla Clear Grip® sandable?
- Yes, cured Gorilla Clear Grip® is sandable.
- Is Gorilla Clear Grip® paintable?
- Yes, when fully cured.
- Is Gorilla Clear Grip® Washer/Dryer safe?
- Yes
- Is Gorilla Clear Grip® photo safe?
- Gorilla Clear Grip® is safe to use with photos.
