- 4 fl. oz.
- 109788
Gorilla
Dries Clear
Wood Glue
Gorilla Dries Clear Wood Glue is an adhesive that woodworkers, carpenters, and hobbyists trust for their woodworking projects. Gorilla Dries Clear Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with Gorilla strength. This PVA glue is incredibly water resistant and dries clear to offer an invisible bond line for your projects.
1. Clean and dry surfaces to be bonded.
2. Shake well before use.
3. Apply glue generously to the surface.
4. Join and clamp for 20-30 minutes. Parts should fit tightly.
5. Excess glue can be removed with a clean, wet cloth or scraped off after glue dries.
6. Allow bond to dry for 24 hours.
7. Remove applicator tip to clean out glue build up.
*For ideal product performance, apply glue on wood-to-wood substrates.
NOTE: Application temperature should be at or above 55°F. Before finishing, sand surfaces to minimize glue exposure.
APPLICATION TEMPERATURE: 55 – 75°F (12 to 24°C), best at room temperature
SERVICE TEMPERATURE: 0 – 150°F (-18 to 66°C)
INDOOR/OUTDOOR: Yes
MOISTURE RESISTANT: Water resistant – not recommended for continual water exposure
PAINTABLE: Yes
SANDABLE: Yes
STAINABLE: No
EXPANDS WHEN CURED: No
CURED COLOR: Clear on Wood Surfaces
TECHNICAL STANDARDS: ANSI/HPVA Type II
STORAGE TIPS: Store at room temperature. Wipe excess glue from spout and keep sealed.
GAP FILLING: No
- DRIES CRYSTAL CLEAR on Wood Surfaces*
- INCREDIBLY STRONG for Wood Projects
- TYPE II Use Indoor/Outdoor
- VERSATILE: Ideal for use on hardwoods, softwoods, and natural wood composites.
*Glue will dry crystal clear on wood surfaces only
Frequently Asked Questions
Lorem ipsum dolor amoset
- How do I remove Gorilla Dries Clear Wood Glue from my surface?
- To clean up while glue is wet, use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue. When areas have completely dried, sand as needed. To clean up glue that has dried, use a sharp putty knife, razor, or sharp scraper to shave hardened glue from surface, then sand as needed.
- Gorilla Dries Clear Wood Glue is too thick for my application, can I thin this glue?
- Gorilla Dries Clear Wood Glue, unlike Original Gorilla Glue, is a water-based adhesive. You can thin Gorilla Dries Clear Wood Glue by adding water (not to exceed 5% weight).
- Will Gorilla Dries Clear Wood Glue bond plastic/vinyl/rubber?
- Once cured, Gorilla Dries Clear Wood Glue complies with FDA #CFR21 175.105 for indirect food contact and can be used on projects such as salad bowls and cutting boards.
- How can I clean a clogged tip?
- To clean the bottle tip, use a clean, damp cloth to wipe off excess glue after closing. If tip becomes clogged with dry glue, remove the cap, pull off the nozzle, and push the clog backward with a toothpick, then rinse cap with warm water. If you have difficulty pulling up on the nozzle, use a pair of pliers or scissors placed at the base of the nozzle and twist slightly.
