- 12.2 oz
- 109852
Gorilla
Spray Adhesive
Ultimate
Gorilla Spray Adhesive Ultimate is an incredibly strong, permanent contact adhesive that resists heat and moisture. Our formula has an aggressive tack that can be used on a variety of materials and surfaces, both indoor and out. The adjustable anti-clog nozzle is easy to use and offers 3 ways to spray web pattern, for a narrower or wider application.
All surfaces should be clean and free of dirt, grease and oil. Protect surrounding areas from overspray to avoid residual adhesive.
1. Shake can well before using.
2. Adjust spray pattern width by turning spray tip to desired setting (Low-Med-High)
3. Hold can in a vertical position 6 to 8 inches away from surfaces to be bonded and apply a uniform coat. Allow to dry to tack (approximately 1 minute) and press surfaces firmly together. Note: material is not repositionable.
4. For Maximum Bond Strength: Spray both surfaces to be joined with multiple coats of adhesive and dry to tack (1-2 minutes, depending on thickness) before bonding. Apply firm pressure when joining.
Note: porous surfaces will require more than one coat.
To avoid possible clogging, turn can away from body, invert and spray a short jet to clear valve and spray tip.
Note: If nozzle experiences a clog, actuate rapid short bursts until cleared.
*Not recommended for polystyrene foam and unsupported vinyl. Certain plastics can experience bond failure due to plasticizer migration. Heat and humidity can affect dry time.
Application Temperature: Between 50°F (10°C) and 90°F (32°C)
Service Temperature: 32°F (0°C) and 180°F (82°C)
Indoor/Outdoor: Yes – Gorilla has some water resistance capabilities but should not be used where finished product could be immersed/submerged in water (example of an outdoor application: wreath on a front door).
Moisture Resistant: Yes
Paintable: Acrylic paints will cure, but can be scratched off; spray paints cover up well, minimal susceptibility to scratch-off; oil-based paint will remain tacky (uncured) but does not scratch off (not recommended for oil-based paints)
Sandable: Not easily sanded
Stainable: Oil stains will remain tacky
Cured Color: Light yellow when applied
Storage: Between 32°F (0°C) and 120°F (48°C) – upper limit is extremely important due to flammability concerns
Gap Filling: No
- PERMANENT BOND – High Strength
- WEB SPRAY
- AGGRESSIVE TACK
- LOW VOC – Meets CA CARB/OTC VOC requirements
- 3 WAYS TO SPRAY – Adjustable nozzle
- RESISTS HEAT & MOISTURE
- MULTI-PURPOSE
- BONDS: Heavy duty fabric, Car Headliners, Foam, Rubber, Felt, Cork, Ceramics, Laminate, Leather, Metal, Plastics*, Wood, Canvas & More
Frequently Asked Questions
Lorem ipsum dolor amoset
- How do I remove Gorilla Spray Adhesive from my fingers and nails?
- To remove Gorilla Spray Adhesive from your fingers and nails, we recommend following these steps:
- While still wet, wipe adhesive off with a dry cloth, and then wash the area with soap and warm water.
- Once cured, rinse well with warm water.
- To remove Gorilla Spray Adhesive from your fingers and nails, we recommend following these steps:
- How do I remove Gorilla Spray Adhesive from my surface?
- To clean surface while adhesive is still wet/uncured, wipe adhesive off the project with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. Once cured, Gorilla Spray Adhesive may be removed using mechanical means by gently scraping surface, being careful not to damage the surface underneath.
- Is Gorilla Spray Adhesive food safe?
- Gorilla Spray Adhesive is not recommended for direct or indirect food contact and should not be considered food safe.
- What surfaces will Gorilla Spray Adhesive bond to?
- Gorilla Spray Adhesive is a multi-purpose product that will bond a wide variety of surfaces including fabric, paper, wood, plastic*, cardboard, foam, metal and more!
NOTE: Not recommended for use on polypropylene (PP) or polyethylene (PE) plastics, vinyl, or any type of rubber with high oil or plasticizer content. Not for use on food contact surfaces.
- Gorilla Spray Adhesive is a multi-purpose product that will bond a wide variety of surfaces including fabric, paper, wood, plastic*, cardboard, foam, metal and more!
- How should Gorilla Spray Adhesive be stored?
- After each use, wipe nozzle with a dry cloth and replace cap. Gorilla Spray Adhesive is a flammable adhesive that should not be used or stored near heat, sparks, flames or while smoking. Do not store at temperatures above 120F. Tip: To avoid possible clogging, turn can away from body, turn upside down and spray a short jet of clear gas after completing each project.
- Will Gorilla Spray Adhesive bond vinyl/acrylic/rubber?
- Gorilla Spray Adhesive will work well on many types of plastic; however, we do not recommend for use on polypropylene (PP) or polyethylene (PE) plastics, vinyl, or any type of rubber with high oil or plasticizer content.
.avif)
%201%20(1).avif)
